Thursday, December 24, 2020

How to fix Quicken error OL–294–A?

 Quicken is the leading personal finance management tool developed by Intuit and is now taken over by HIG Capital. It is a well-known platform that helps users to manage budget and track investments. However, at times it shocks users with Quicken error OL–294–A, which occurs while updating the account using online services.

The primary reason for Quicken error code OL–294–A is that it is not getting proper server response. Sometimes, the problem also arises due to the bank server being down temporarily and not allowing it to connect. This guide covers all the possible causes and the steps to eliminate the issue to help you overcome this error.              

 

What causes Quicken error OL–294–A?

The following reasons are the culprit that causes Quicken error code OL–294–A.

·         You might have entered incorrect or outdated account credentials.

·         There is a temporary server outage.

·         You are using an outdated Quicken application.

·         You have not connected the online services correctly.

Steps to fix Quicken error code OL–294–A

Step 1. Update quicken to the latest version

1.      Launch Quicken on your computer.

2.      Click the help tab.

3.      Go to check for updates.

4.      Click yes over the available update to install.

5.      If your Quicken is already updated, you will be notified of the new version's release.

 

Step 2. Refresh your online account on Quicken

1.  Open Quicken.

2.  Go to the accounts option on the left side.

3.  On the account register screen, click the gear icon with a drop-down arrow on the top right side.

4.  Now click update now.

5.  On the next screen, you will have to enter the vault or bank password.

6.   Next, click update now.

7.  If you are still facing the error code OL–294–A, update the accounts, proceed to the next step.

Step 3. Wait for 1 to 2 business days to get the problem automatically resolved

Sometimes, the problem automatically resolves after 24 to 48 business hours. Whatever changes you made in the above steps will take some time to reflect on the bank's server or website. Even after waiting for two days, if the problem doesn't resolve, then you can try the next steps for advanced troubleshooting.

Step 4. Verify your account details



1.    Launch Quicken.

2.    Click the Tools tab.

3.    Now hit the account list option.

4.    Click edit on the account that is creating the problem.

5.    Click the General tab and verify the account details such as account number, your customer ID, etc.

Step 5. Verify and update the account password

1. Ensure that your computer is connected to the stable internet and then launch Quicken.

2. Go to the Tools section and click the one-step update.

3. Checkmark the troubled account and ensure all other accounts are unchecked.

4. Now enter the password and click update now.

Step 6. Deactivate your account

If any of these five steps do not eliminate the issue, you must try deactivating your account. You need not afraid of losing your data due to deactivation. It's totally safe.

 

1.      To deactivate, firstly, click the Tools tab.

2.      Now click the account list.

3.      Next, you will have to click on the edit option adjacent to the account that creates trouble.

4.      Now you will have to choose the online services tab.

5.      After that, click the deactivate button.

6.      Now click yes to confirm this selection.

7.      Lastly, you have to click ok to save the settings and click Done to exit the screen.

Step 7. Reactivate the account that you have deactivated

After deactivating your account, you will have to reactivate it using the following steps.

1. Open Quicken on your computer.

2. Now you need to go to the tools section.

3. Click the add account option.

4. On the further screen, choose the account type like saving, current, checking, etc.

5. Now you will have to click the advanced tab situated at the bottom left corner.

6. Enter the name of your financial institution or bank and click next.

7. Choose the connection method and click next.

8. You will be prompted to enter the username and password, fill in the details, and click connect.

9. Now Quicken tries to establish a connection with the server to look up your bank account.

10. Once you see the list of accounts on your screen, then it's time to reactivate the accounts.

11. You don't have to add the accounts again. Instead, you will have to link it with an existing account in Quicken.

12.  Once done, click next.

13.  Now click Finish to exit the screen.   

Step 8. Get in touch with your financial institution or bank

If you cannot resolve the Quicken update error OL–294–A, you must contact your bank to tell them the exact problem you face. High possibilities are that your bank is facing issues with troubled servers, or they have made some changes at their end.

Additionally, you can also contact our Quicken support experts to overcome the error code OL–294–A. We will provide you the best solutions to get accurate results.

Wednesday, April 22, 2020

How To Get Rid Of Quicken Error Ol-332-A?


Quicken is the optimum bookkeeping software in the worldwide developed by Intuit. Sometimes, Quicken users may face couple of technical errors that require to be instantly resolved. Quicken Error Ol-332-A is one common error including them and can generally been arisen when anyone enters the wrong credential like ‘Username or Password’ in Quicken. Therefore, it is highly suggested you all that while entering the customer ID or Quicken password, check the caps-lock key once on your keyboard to ensure that it is not ON. Moreover, relevant guides are mentioned in this post. So, all I would like to say you that keep your eyes feast over here.
What Causes Quicken Error Ol-332-A
Check out the list of causes noted below by which Quicken Ol-332-A error occurs:
·         Due to improper or incomplete installation of Quicken software on your system or the software you installed is corrupted
·         The Windows registry from a Quicken-related change is damaged
·         Due to virus or malware attack such an specific Quicken error code appears
Solutions To Eliminate Quicken Error Ol-332-A
Below are the most effective troubleshooting guides for Quicken Error Ol-332-A problem. So, despite looking here and there keep an eye on the provided fixing solution and follow them stepwise accordingly:
Solution 1: Verify Your PIN
Make sure that the password you have entered is correct. Some banks have special requirements for the Quicken password including case-sensitivity, minimum length, or a mix of letters and numbers. Your password could differ from the one you use on the online banking website. Be sure to re-enter your password carefully.
Note: If you are setting up online services such as transaction download for this account there may be additional information shown in the dialog where you enter your Customer ID and PIN correctly that may tell you what should be entered.
 Tip:
Typing your username/customer ID and password/PIN into a text application, such as Notepad, MS WordPad, or other text/word application, is a "fool-proof" way of confirmation that you don't have typo errors in these fields.  The "confirmed" name/password can further be copied by pressing (Ctrl + C) key and pasted by pressing (Ctrl + V) key on your keyboard into the respective fields in Quicken.
Once you verify your password by following the above tip, there is a possibility of rectifying Quicken Error Ol-332-A. But if still exists, continue to the next guide.
Solution 2: Verify Your Customer ID
In case you enter an incorrect customer ID or username of your financial institution, then chances are high of facing Ol-332-A quicken error. That’s why, we suggest you to verify your customer ID with the help of below-noted guides:
·         Launch Quicken on Window
·         Select the Tools Menu > Account List
·         Select the account and click Edit
·         Verify that the Customer ID displayed under the General Information Tab is correct.
·         If the Customer ID is correct, then also review the financial institution name and account information such as the account and routing number as mistakes in that can also lead to such an error
Proceed to the next solution!
Solution 3: Check The Password Vault
If you use the Password Vault, it may have stored a wrong password. Here is the right way to check it out:
·         From the Quicken Tools menu, select “One Step Update” option
·         At the “Password Vault” Password dialog tap “Cancel”
·         Enter the password information manually for this financial institution
·         If you connect successfully, then select Online menu > Password Vault > Edit
·         Follow the on-screen instructions to correct the password stored for this financial institution
If you are assured about your Customer ID and password that they are inserted correctly, then contact the financial institution for further assistance.

 Make a Call at Helpline Number to Direct Contact Tech-savvy
A helpline number is provide by us so that you can make a direct connection with us and obtain reliable and cost-effective solution of your problematic error. Hence, your one call will give you door-step solution of Quicken Error code Ol-332-A.

Monday, February 24, 2020

Fix Quicken error code 1310 or 1303 using this guide


Quicken error code 1310 pops up during installation or downloading online. However, there is no doubt that quicken ranks top in the market for providing personal accountants for organizing their financial assets. Almost all businessmen avail the benefits of its amazing features. It also allows users to print checks and saves records of your finance. Although once in a blue moon people may face error code. But, it’s not something you need to get anxious because it’s due to some technical faults and can be rectified easily. If you are facing this issue, then this article is for you. Go through and try to fix it.

What are the causes of Quicken Error Code 1310?

Though, this error doesn’t have abundant reasons as per the other errors. But, here are few of them:
  • A corrupt Quicken Software downloaded
  • Virus or malware attack
  • Quicken files damaged or infected
  • Corrupt Windows registry
These are some reasons that may tend Error code 1310. But, how will you recognize that Quicken error code 1310 occurs? For this, you must know the symptoms.

What are the symptoms of Quicken error code 1310?

The first signal comes when your Quicken software encounters suddenly crashes or freezes. Furthermore, below are other symptoms for Quicken error code 1310:
  • When active program is crashed
  • Running the programs regularly which is already crashes your PC
  • If your computer runs slow and responds late
Effective Steps to fix Quicken Error code 1310


Once you get to know the symptoms and causes, now you can go for troubleshooting steps:

Step 1: Create New Folders in Program file

  • Launch Quicken
  • Tap on Quicken Setup or quicken.exe
  • Agree to ‘License Agreement’
  • Tap on Next
  • Now, choose Installation Location
  • Thereafter, select ‘change install location’
  • Next, change the name to C:\Program Files (x86)\Quicken 1
  • Tap ‘Ok’


Step 2: Change Permission

Windows 10 and 8

  • Tap on File Explorer and make right-click on C:\
  • Choose Properties
  • Select Security Tab
  • Make a click on Administrator
  • Select to allow Full control
  • Tap Advances>Change Permission
  • Make sure you deselect all child object permission entries
  • Tap on ‘Apply to save changes’
  • Lastly, click Ok


Windows 7

  • Navigate to Windows Explorer
  • Make right click on C:\
  • Choose Properties and Security tab
  • Tap on Administrator
  • Select ‘Full Control’
  • Navigate to Owner tab
  • Tap ‘Edit’
  • Thereafter, choose Administrator
  • Tick mark on ‘Replace owner on sub containers and objects’
  • Now, apply changes and click Ok
  • Again, right-click on C:\
  • Tap on Properties
  • Choose Program Data>Security tab>click Advanced
  • Lastly click Apply>Ok


Step 3: Correct Permission from Command Prompt

  • Tap Windows+R
  • Now, type CMD
  • In Command Prompt window, type icacls “c:\ProgramData” /T/C?GRANT Administrator:f
  • Lastly, click Enter


 Apply the above given steps to fix Quicken Error code 1303 or 1310. If you fail to understand then contact the experts for help. They will guide you these steps properly.